FC STACK SHOCK HISTORY CLEAR
After completion of the FC stack assembly, clear FC Stack Shock History using this function.
Tech Tips
FC Stack Shock History is not automatically cleared even if the FC stack assembly is replaced, nor it cannot be cleared even if the negative terminal cable is disconnected from the auxiliary battery.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Enter the following menus: Powertrain / EV / Utility / FC Stack Shock History Clear
Tester Display |
---|
FC Stack Shock History Clear |
Follow the instructions on the GTS screen to initialize the history data.
Enter the following menus: Powertrain / EV / Utility / FC Stack Shock History
Tester Display |
---|
FC Stack Shock History |
Check that "FC Stack Shock History" in the Data List shows OFF.
Note
If "FC Stack Shock History" is showing ON, clearance of FC Stack Shock History may not be completed correctly. Try to clear the history again.