РЫЧАГ ПЕРЕКЛЮЧЕНИЯ ПЕРЕДАЧ СНЯТИЕ

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. SECURE VEHICLE


    1. Fully apply the parking brake and chock a wheel.

      CAUTION:


      • Make sure to apply the parking brake and chock a wheel before performing this procedure.

      • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

      A01LCYA
  2. REMOVE CONSOLE BOX ASSEMBLY

    Click here

  3. REMOVE NO. 1 CONSOLE BOX DUCT (w/ Rear Air Duct)


    1. A01LB99

      Remove the 2 clips and No. 1 console box duct.

  4. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01LGBAC01
      B0028XU Disconnect in this Direction

      Disconnect the transmission control cable end from the transmission floor shift assembly.

    2. Remove the clip and disconnect the transmission control cable assembly from the transmission floor shift assembly.

  5. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY


    1. Disconnect the 2 connectors from the transmission floor shift assembly.

      A01LGAVC01
      *A for RHD *B for LHD
    2. Detach the 3 wire harness clamps and disconnect the wire harness from the transmission floor shift assembly.

    3. A01LBZV

      Remove the 4 bolts and transmission floor shift assembly from the vehicle body.