PROCEDURE
INSPECT FUEL FILTER ASSEMBLY
*a | Component without harness connected (Level Warning Switch) |
*b | Level Warning Switch Connector |
Inspect the level warning switch.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||
---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the fuel filter assembly.
Inspect the clogging switch.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||
---|---|---|---|---|---|---|
|
If the result is not as specified, replace the fuel filter assembly.