PROCEDURE
INSPECT ACCELERATOR PEDAL SENSOR
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Powertrain / Engine / Data List / Accel Sens. No.1 Volt % and Accel Sens. No.2 Volt %.
Tester Display |
---|
Accel Sens. No.1 Volt % |
Accel Sens. No.2 Volt % |
Operate the accelerator pedal rod and check that the "Accel Sens. No.1 Volt %" and "Accel Sens. No.2 Volt %" values are within the specification.
If the result is not as specified, refer to DTC P2120.