CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the valve body assembly removal/installation are shown below.
Replacement Part or Procedure | Necessary Procedures | Effects/Inoperative when not Performed | Link |
---|---|---|---|
|
Reset memory | Large shift shock | for 1GR-FE: Click here for 1GD-FTV: Click here for 2GD-FTV: Click here for 2TR-FE: Click here |
PROCEDURE
DISCONNECT TRANSMISSION WIRE
REMOVE VALVE BODY OIL STRAINER ASSEMBLY
Remove the 3 bolts and valve body oil strainer assembly from the transmission valve body assembly.
REMOVE TRANSMISSION VALVE BODY ASSEMBLY
Remove the bolt, detent spring cover and detent spring from the transmission valve body assembly.
Remove the 12 bolts and transmission valve body assembly from the automatic transmission case sub-assembly.
REMOVE MANUAL VALVE
Remove the manual valve from the transmission valve body assembly.
REMOVE TRANSMISSION CASE GASKET
Remove the 2 transmission case gaskets from the automatic transmission case sub-assembly.