PROCEDURE
PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
REMOVE AIR CLEANER CAP SUB-ASSEMBLY WITH AIR CLEANER HOSE
REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
REMOVE AIR CLEANER CASE SUB-ASSEMBLY
REMOVE FAN AND GENERATOR V BELT
REMOVE NO. 2 IDLER PULLEY ASSEMBLY
Remove the bolt, 2 pulley plates, No. 2 idler pulley assembly and spacer.
REMOVE GENERATOR ASSEMBLY
Remove the nut and generator wire from terminal B.
Disconnect the generator connector.
Remove the 2 bolts and generator assembly.