REAR BUMPER(for Wagon) REMOVAL
PROCEDURE
REMOVE REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)
REMOVE REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)
Tip:Use the same procedure as for the LH side.
REMOVE REAR BUMPER ASSEMBLY
-
Protective Tape
Apply protective tape around the rear bumper assembly as shown in the illustration.
-
Remove the 2 screws.
-
Remove the 2 screws and 2 clips.
-
Using a clip remover, remove the 7 clips.
-
Using a clip remover, remove the clip.
Tip:Use the same procedure for the RH side and LH side.
-
Disengage the 7 claws as shown in the illustration.
Tip:Use the same procedure for the RH side and LH side.
-
Disengage the 4 claws as shown in the illustration.
w/ TOYOTA Parking Assist-sensor System:
Disconnect the connector.
Remove the rear bumper assembly.
-