CAUTION / NOTICE / HINT
The anti-lock brake system troubleshooting procedures are based on the premise that the CAN communication system is functioning normally. Check the CAN communication system first before troubleshooting the anti-lock brake system.
*: Use the GTS.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
Result | ||
---|---|---|
|
CUSTOMER PROBLEM ANALYSIS
Interview the customer and confirm the trouble.
Result | ||
---|---|---|
|
CHECK DTC AND FREEZE FRAME DATA*
Check and record DTC and Freeze Frame Data.
for DTC Check/Clear:Click here
for Freeze Frame Data:Click here
Clear the DTC and Freeze Frame Data.
Reconfirm the DTC.
Reconfirm the DTC based on the recorded DTC and Freeze Frame Data.
for DTC Check/Clear:Click here
for Freeze Frame Data:Click here
Result | ||||
---|---|---|---|---|
|
GO TO STEP 6
DIAGNOSTIC TROUBLE CODE CHART
Proceed to Diagnostic Trouble Code Chart.
Result | ||
---|---|---|
|
GO TO STEP 7
SYMPTOM SIMULATION
Proceed to Check for Intermittent Problems.
Result | ||
---|---|---|
|
PROBLEM SYMPTOMS TABLE
Proceed to Problem Symptoms Table.
Result | ||
---|---|---|
|
CIRCUIT INSPECTION*
Result | ||
---|---|---|
|
IDENTIFICATION OF PROBLEM
Result | ||
---|---|---|
|
REPAIR OR REPLACE
Result | ||
---|---|---|
|
CONFIRMATION TEST*
Result | ||
---|---|---|
|
END