PROCEDURE
INSPECT PURGE VSV
Inspect the resistance.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the purge VSV.
Check the operation of the purge VSV.
*a | Port F |
*b | Port E |
*c | Does not flow |
*d | Air |
Check that air does not flow from port F when air is applied to port E.
*a | Port F |
*b | Port E |
*c | Air |
Apply battery voltage to the connector and check the purge VSV operation.
OK | ||||
---|---|---|---|---|
|
If the result is not as specified, replace the purge VSV.