CRUISE CONTROL SYSTEM(for 1ND-TV without Driving support ECU), Diagnostic DTC:P0575
DTC Code | DTC Name |
---|---|
P0575 | Cruise Control Input Circuit |
DESCRIPTION
This DTC indicates an abnormality in the ECM.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
P0575 |
Cruise Control Input Circuit |
When both of the following conditions are met:
|
ECM |
CAUTION / NOTICE / HINT
Before replacing the ECM, refer to Service Bulletin.
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is detected, the fail-safe function remains on until the ignition switch is turned off.
PROCEDURE
CHECK FOR DTCS (CRUISE CONTROL SYSTEM)
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Clear the DTCs.
Powertrain > Cruise Control > Clear DTCs
Perform the following to make sure that the DTC detection conditions are met.
Tip:If the detection conditions are not met, the malfunction cannot be detected.
Drive the vehicle at a speed for which cruise control system operation is possible.
Turn the cruise control system on using the cruise control switch (ON-OFF button).
Push the cruise control switch to -/SET to begin control of vehicle speed using the cruise control system.
Check for DTCs.
Powertrain > Cruise Control > Trouble Codes
Result
Result
Proceed to
DTC is not output
A
DTC is output
B