PROCEDURE
INSPECT STOP LIGHT CONTROL ECU ASSEMBLY
*a | Front view of wire harness connector (to Stop Light Control ECU Assembly) |
Disconnect the stop light control ECU assembly connector.
Measure the voltage and resistance on the wire harness side connector according to the value (s) in the table below.
Standard Voltage | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Standard Resistance | ||||||
---|---|---|---|---|---|---|
|
If the result is not as specified, repair or replace the wire harness or connector.
Reconnect the stop light control ECU assembly connector.
*a | Component with harness connected (Stop Light Control ECU Assembly) |
Measure the voltage according to the value (s) in the table below.
Standard Voltage | |||||||||
---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the stop light control ECU assembly.