PARKING ASSIST ECU REMOVAL

PROCEDURE


  1. REMOVE REAR SEAT ASSEMBLY


    1. for Manual Seat:

      Click here

    2. for Power Seat:

      Click here

  2. REMOVE REAR FLOOR FINISH PLATE

    Click here

  3. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  4. REMOVE UPPER DECK TRIM SIDE BOARD RH

    Click here

  5. REMOVE ROPE HOOK ASSEMBLY

    Click here

  6. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY

    Click here

  7. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

  8. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  9. REMOVE PARKING ASSIST ECU


    1. A01O8RIC01
      *A w/ Panoramic View Monitor System
      *B w/o Panoramic View Monitor System
      B002HVY Nut
      B002I10 Connector

      Loosen the temporary nut (A).

    2. w/ Panoramic View Monitor System:


      1. Remove the 2 nuts and parking assist ECU.

      2. Disconnect the 3 connectors.

    3. w/o Panoramic View Monitor System:


      1. Remove the nut and parking assist ECU.

      2. Disconnect the 3 connectors.