PARKING BRAKE LEVER REMOVAL
PROCEDURE
REMOVE REAR CONSOLE BOX ASSEMBLY
for Hatchback, Wagon:Click hereClick here
for Sedan:Click hereClick here
LOOSEN NO. 2 WIRE ADJUSTING NUT
Release the parking brake lever lock and return it to its off position.
-
*1
Lock Nut
*2
No. 2 Wire Adjusting Nut
Remove the lock nut and loosen the No. 2 wire adjusting nut.
SEPARATE NO. 3 PARKING BRAKE CABLE ASSEMBLY
-
*1
No. 3 Parking Brake Cable Assembly
*2
No. 2 Parking Brake Cable Assembly
Separate the No. 3 parking brake cable assembly from the parking brake lever sub-assembly as shown in the illustration.
-
SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY
Tip:Perform the same procedure as for the No. 3 parking brake cable assembly.
REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
-
Disconnect the parking brake switch connector.
-
Remove the 2 bolts and parking brake lever sub-assembly.
-