SIMPLE INTELLIGENT PARKING ASSIST SYSTEM, Diagnostic DTC:C1626
DTC Code | DTC Name |
---|---|
C1626 | Steering Angle Sensor Failure |
DESCRIPTION
This DTC is stored when the clearance warning ECU assembly receives a steering angle sensor internal malfunction signal from the spiral cable with sensor sub-assembly via CAN communication.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
---|---|---|---|
C1626 |
Steering Angle Sensor Failure |
A malfunction signal is transmitted from the spiral cable with sensor sub-assembly |
|
CAUTION / NOTICE / HINT
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization may be needed. Refer to Initialization.
PROCEDURE
REPLACE SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY
Replace the spiral cable with sensor sub-assembly.
Result
Proceed to
NEXT
CHECK DTC OUTPUT
Clear the DTCs.
Body Electrical > Clearance Sonar / Simple-IPA. > Clear DTCs
Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Clearance Sonar / Simple-IPA. > Trouble Codes
OK
No DTCs are output.
Result
Proceed to
OK
NG
OK END (SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY WAS DEFECTIVE)
NG REPLACE CLEARANCE WARNING ECU ASSEMBLY
for Hatchback LHD, Wagon LHD:Click here
for Hatchback RHD, Wagon RHD:Click here
for Sedan:Click hereClick here