PROCEDURE
INSPECT BACK DOOR LOCK ASSEMBLY
Check the operation of the door lock motor.
Move the door lock to the lock position.
*a | Component without harness connected (Back Door Lock Assembly) |
*b | Lock |
*c | Unlock | - | - |
Apply auxiliary battery voltage to the door lock motor and check the operation of the door lock motor.
OK | ||||
---|---|---|---|---|
|
If the result is not as specified, replace the back door lock assembly.
Check the operation of the door courtesy switch.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | |||||||||
---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the back door lock assembly.