PROCEDURE
SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY
Move the shift lever to N.
Remove the clip and pin, and separate the floor shift gear shifting rod sub-assembly from the transmission control shaft lever RH.
REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Disconnect the park/neutral position switch assembly connector.
Remove the nut, spring washer and transmission control shaft lever RH from the park/neutral position switch assembly.
*1 | Nut Stopper |
*2 | Lock Nut |
Pry out the nut stopper and remove the lock nut and the nut stopper from the park/neutral position switch assembly.
Remove the bolt and park/neutral position switch assembly from the automatic transmission assembly.
Tech Tips
Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.