TIRE PRESSURE WARNING RECEIVER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work (Click hereClick hereClick hereClick hereClick here).

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click hereClick hereClick hereClick hereClick hereClick here).

  3. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH

  4. REMOVE TIRE PRESSURE WARNING ECU AND RECEIVER

    1. C278885

      Disconnect the connector.

    2. Remove the bolt and tire pressure warning ECU and receiver.