LIGHTING SYSTEM CUSTOMIZE PARAMETERS
CUSTOMIZE LIGHTING SYSTEM (INT)
Customizing using the GTS
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Illuminated Entry.
Select the setting by referring to the table below.
Illuminated Entry
Tester Display
Description
Default
Setting
ECU
Lighting Time
Changes the lighting time when the illuminated entry system operates.
15 s
10:30 s,00:15 s,01:7.5 s
Main body ECU (Multiplex network body ECU)
I/L when ACC OFF
Lights up the lights that are controlled by the illuminated entry system when the ignition switch is turned from ACC or ON to off.*1
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
I/L ON W/Door Key Unlock
Lights up the lights that are controlled by the illuminated entry system when the doors are unlocked using a mechanical key or door control transmitter.*1
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
Room Light when Aprchd
Lights up the lights that are controlled by the illuminated entry system when a key enters any actuation area around the doors.*1, *2
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
Interior Light Control
Lights up the lights that are controlled by the illuminated entry system.*1, *3
ON
0:OFF,1:ON
Main body ECU (Multiplex network body ECU)
*1: Refer to System Description for the lights that are controlled by the illuminated entry system.
*2: w/ Entry and Start System
*3: for Main Body ECU with 2 Connectors