DESCRIPTION
When the power switch is on (IG), the rear door window regulator assembly (for RH door) is operated by the rear power window regulator switch assembly (for RH door).
WIRING DIAGRAM
CAUTION / NOTICE / HINT
Note
Inspect the fuses for circuits related to this system before performing the following procedure.
Check that the window lock switch is off before performing the following procedure.
PROCEDURE
CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR) - AUXILIARY BATTERY)
Disconnect the J5 rear power window regulator switch assembly (for RH door) connector.
Measure the voltage according to the value(s) in the table below.
Standard Voltage | ||||||
---|---|---|---|---|---|---|
|
Result | |||
---|---|---|---|
|
NG |
REPAIR OR REPLACE HARNESS OR CONNECTOR |
OK |
INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR)
*a | Component without harness connected (Rear Power Window Regulator Switch Assembly (for RH Door)) |
Remove the rear power window regulator switch assembly (for RH door).
Measure the resistance when the switch is operated according to the value(s) in the table below.
Standard Resistance | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Result | |||
---|---|---|---|
|
NG |
REPLACE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR) Click here |
OK |
CHECK HARNESS AND CONNECTOR (REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR) - REAR DOOR WINDOW REGULATOR ASSEMBLY (FOR RH DOOR))
Disconnect J6 the rear door window regulator assembly (for RH door) connector.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Result | |||
---|---|---|---|
|
NG |
REPAIR OR REPLACE HARNESS OR CONNECTOR |
OK |
INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
*A | for LHD |
*B | for RHD |
*a | Component without harness connected (Power Window Regulator Master Switch Assembly) |
Remove the power window regulator master switch assembly.
Measure the resistance when the switch is operated according to the value(s) in the table below.
Standard Resistance | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||||||||
|
Result | |||
---|---|---|---|
|
NG |
REPLACE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Click here |
OK |
CHECK HARNESS AND CONNECTOR (POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY - REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY (FOR RH DOOR)
Measure the resistance according to the value(s) in the table below.
Standard Resistance | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|||||||||||||||
|
Result | |||
---|---|---|---|
|
OK |
REPLACE REAR DOOR WINDOW REGULATOR ASSEMBLY (FOR RH DOOR) Click here |
NG |
REPAIR OR REPLACE HARNESS OR CONNECTOR |