AUTOMATIC HIGH BEAM SYSTEM OPERATION CHECK
AUTOMATIC HIGH BEAM SYSTEM OPERATION CHECK
-
*a
Automatic High Beam Indicator Light
Check the operation of the automatic high beam indicator light.
Turn the ignition switch to ON.
Turn the headlight dimmer switch to the AUTO position and the low beam headlights are on.
Turn the headlight dimmer switch to the high position.
Check that the automatic high beam indicator light comes on.
Check the operation of the automatic high beam function.
At night, when driving the vehicle with the automatic high beam system in standby mode, check that the high beams automatically turn on after a short delay when all of the following conditions are met:
Vehicle speed is more than 40 km/h (25 mph)*1 or 30 km/h (19 mph)*2.
The area in front of the vehicle is dark.
There are no oncoming vehicles with headlights on.
There are no preceding vehicles with taillights on.
There are few streetlights along the street ahead.
*1: for G.C.C and Europe
*2: except G.C.C and Europe
At night, when driving the vehicle with the high beams turned on by the automatic high beam system, check that the automatic high beam system turns off the high beams and returns to standby mode when any of the following conditions are met:
Vehicle speed is less than 30 km/h (19 mph)*1 or 25 km/h (16 mph)*2.
The level of ambient light is higher than a specified threshold.
There are oncoming vehicles with headlights on.
There are preceding vehicles with taillights on.
Light from streetlights ahead is higher than a specified threshold.
*1: for G.C.C and Europe
*2: except G.C.C and Europe
-