PROCEDURE
REMOVE NO. 1 ENGINE COVER
REMOVE NO. 1 IGNITION COIL
Disengage the clamp and disconnect the wire harness from the cylinder head cover sub-assembly.
Disconnect the 4 No. 1 ignition coil connectors.
Remove the 4 bolts and 4 No. 1 ignition coils from the cylinder head cover sub-assembly.
Note
If a component has been dropped or subjected to a strong impact, replace it.
Arrange the removed parts in the correct order.
REMOVE SPARK PLUG
*a | 14 mm Spark Plug Wrench |
Using a 14 mm spark plug wrench, remove the 4 spark plugs from the cylinder head sub-assembly.
Note
If a component has been dropped or subjected to a strong impact, replace it.
Arrange the removed parts in the correct order.