FUEL PUMP DISASSEMBLY

CAUTION / NOTICE / HINT

Note:

Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly.

Click hereClick here

PROCEDURE

  1. REMOVE NO. 1 FUEL SUB-TANK

    1. A126123

      Disconnect the wire harness connector.

    2. A201342C01

      *1

      Fuel Suction Plate

      *2

      E-Ring

      V100135

      Lower

      Using needle nose pliers, remove the E-ring.

      Tip:

      Slightly lower the fuel suction plate to remove the E-ring.

    3. A126684

      Remove the 2 springs from the fuel suction plate.

    4. A126125

      Detach the 2 claws and remove the No. 1 fuel sub-tank.

    5. A300846

      Detach the claw of the jet pump nozzle.

    6. A126798C01

      *1

      Jet Pump

      *2

      Protective Tape

      Using a screwdriver, remove the jet pump.

      Tip:

      Tape the screwdriver tip before use.

    7. A195888C01

      *1

      Jet Pump

      *2

      O-Ring

      Remove the O-ring from the jet pump.

  2. REMOVE NO. 1 FUEL SUCTION SUPPORT

    1. A300842

      Using needle nose pliers, detach the 2 claws and remove the No. 1 fuel suction support.

  3. REMOVE FUEL PUMP

    1. A197085

      Detach the 5 claws on the fuel filter assembly and remove the fuel pump from the fuel filter assembly.

      Note:

      When detaching the claw, do not disconnect the fuel main tube.

    2. A197086

      Disconnect the fuel pump connector.

    3. A197087C01

      *1

      O-Ring

      *2

      Fuel Pump Spacer

      Remove the O-ring from the fuel filter assembly.

    4. Remove the fuel pump spacer from the fuel pump.