MANUAL TRANSAXLE ASSEMBLY REMOVAL
PROCEDURE
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
REMOVE REAR ENGINE MOUNTING INSULATOR
DISCONNECT ENGINE WIRE
-
*a
Back-up Light Switch Assembly Connector
*b
Park/neutral Position Switch Assembly Connector
Disconnect the back-up light switch assembly connector.
Disconnect the park/neutral position switch assembly connector.
Disconnect the 3 clamps from the manual transaxle assembly.
Remove the bolt and disconnect the engine wire from the manual transaxle assembly.
-
Disconnect the 2 clamps and engine wire from the manual transaxle assembly.
-
REMOVE NO. 1 AIR TUBE
-
Loosen the hose clamp and remove the 2 bolts and No. 1 air tube from the air tube support and hose.
-
REMOVE STARTER ASSEMBLY
REMOVE AIR TUBE SUPPORT
-
Remove the 2 bolts and air tube support from the manual transaxle assembly.
-
REMOVE OIL PAN INSULATOR
-
Remove the 2 bolts and oil pan insulator from the stiffener plate RH and stiffener plate LH.
-
REMOVE STIFFENER PLATE LH
-
Remove the 4 bolts and stiffener plate LH from the engine assembly and manual transaxle assembly.
-
REMOVE STIFFENER PLATE RH
-
Remove the 4 bolts and stiffener plate RH from the engine assembly and manual transaxle assembly.
-
REMOVE MANUAL TRANSAXLE ASSEMBLY
-
Remove the 5 bolts and manual transaxle assembly from the engine assembly.
-
REMOVE WIRE HARNESS CLAMP BRACKET
-
Remove the bolt and wire harness clamp bracket from the manual transaxle assembly.
-
REMOVE ENGINE MOUNTING BRACKET LH
-
*A
Type A
*B
Type B
Remove the 4 bolts and engine mounting bracket LH from the manual transaxle assembly.
-
REMOVE FRONT ENGINE MOUNTING BRACKET
-
*A
Type A
*B
Type B
Remove the 3 bolts and front engine mounting bracket from the manual transaxle assembly.
-
REMOVE REAR ENGINE MOUNTING BRACKET
-
*A
Type A
*B
Type B
Remove the 5 bolts and rear engine mounting bracket from the manual transaxle assembly.
-
REMOVE SPEEDOMETER DRIVEN HOLE COVER SUB-ASSEMBLY
-
Remove the bolt and speedometer driven hole cover sub-assembly from the manual transaxle assembly.
Remove the O-ring from the speedometer driven hole cover sub-assembly.
-