INITIALIZE FRONT POWER SEAT CONTROL SYSTEM
Note
The position sensor initialization must be performed if one of the following occurs.
The front power seat switch assembly*1 is replaced.
The position control ECU assembly*2, *3, *4 is replaced.
The front seat adjuster LH is inspected or replaced.
The front seat adjuster RH*4 is inspected or replaced.
The power seat reclining motor assembly is inspected or replaced.
The lumbar support adjuster assembly LH*2, *3, *4 is inspected or replaced.
The lumbar support adjuster assembly RH*4 is inspected or replaced.
The front seatback support LH*2, *3, *4 is inspected or replaced.
The front seatback support RH*4 is inspected or replaced.
The front seatback adjuster assembly*3, *4 is inspected or replaced.
*1: for Driver Side, Standard Seat Type
*2: for Driver Side, Sports Seat Type
*3: for Driver Side, Luxury Seat Type
*4: for Front Passenger Side, Luxury Seat Type
Perform the initialization operation
Turn the power switch on (IG).
Press the front vertical switch of the power seat switch downward 3 times.
Within 10 seconds of the above operation, begin the following operation: perform the rearward reclining operation and upward lifter operation simultaneously for 10 seconds or more (buzzer sounds for 0.5 seconds). This will start the initialization.
for front passenger seat (for Luxury Seat Type, for Ottoman):
When the position control ECU assembly (front passenger seat side) is replaced or initialization is performed, slide the seat and move the ottoman the farthest possible to store those positions.