CUSTOMIZE ENTRY AND START SYSTEM (for Start Function)
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current setting before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Display (Item) | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Ignition Available Area | All | Function to permit opening luggage compartment door | Front or All | Certification ECU |
Customizing with the Multi-display
Turn the power switch on (IG).
Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Entry and start system | On | Function that enables or disables the entry and start system. | On or Off | Certification ECU |
CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch ON (IG).
Turn the tester on.
Enter the following menus:
Select: Body / Tilt & Telescopic / Utility / Customize.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Autoaway / Return function | ON | ON/OFF of the auto away / return function | ON/OFF |
CUSTOMIZE HEATED STEERING WHEEL SYSTEM
Customizing with the GTS
Connect the GTS.
Turn the power switch on (IG).
Turn the tester on.
Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize / Air Conditioner.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Steering Heater Sensitivity Adjust | 0 | Adjusts the operating time of the steering heater when the power switch is turned on (IG). | +2 / +1 / 0 / -1 / -2 |
Steering Heater Auto Function | ON | Automatic operation of the steering heater when the power switch is turned on (IG) can be set on or off. | ON / OFF |
Customizing with the accessory meter
Turn the power switch on (IG).
Enter the following menus: Body Electrical / Air Conditioner / Utility / Customize / Air Conditioner.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Auto Heated Steering Wheel | On | Automatic ON setting | On / Off |
Auto Heater Str Wheel Time | Center(Level3) | Adjustment of the length of the OFF timer when automatic is set to ON | Level1, Level2, Level3, Level4, Level5 |
CUSTOMIZE AIR CONDITIONING SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS.
Turn the power switch ON (IG).
Turn the GTS on.
Enter the following menus: Customize Setting /.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Set Temperature Shift | Normal | To control with the shifted temperature against the display temperature | +2 C, +1 C, Normal, -1 C, -2 C |
Compressor Mode | Automatic | Function to turn the A/C switch ON automatically by pressing the AUTO button when the blower is ON and the A/C switch is OFF | Manual or Automatic |
Air Inlet Mode | Automatic | In case of turning the A/C switch ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode | Manual or Automatic |
Foot/DEF Auto Mode | ON | Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON | ON or OFF |
Foot/DEF Automatic Blow Up Function | ON | Function to change the blower level automatically when the defroster is ON | ON or OFF |
Ambient Temperature Shift | Normal | Function to control the shifted ambient temperature in relation to the displayed ambient temperature | +3 C, +2 C, +1 C, Normal, -1 C, -2 C, -3 C |
Rear A/P HI Set | ON | Function to permit the Rear A/P HI Set when AUTO MODE is ON | ON or OFF |
Filter Sensor | Normal | Function to change the sensitivity of the air conditioning filter clogging sensor | Less, Normal, More |
Emission Gas Sensor Shift | Normal | Function to change the sensitivity of the exhaust gas sensor | Much More, More, Little More, Normal, Little Less, Less, Much Less |
Add Foot Air in FACE Mode | ON | When the FACE mode is selected, an additional amount of air blow to the foot area. Selecting OFF will cancel this additional air flow | ON or OFF |
ECO MODE Cancel | ON | Function to cancel the ECO mode drive when item is ON | ON or OFF |
Customizing using the Accessory meter
Turn the power switch ON (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.
Select the setting by referring to the table below:
Display | Default | Content | Setting |
---|---|---|---|
Smog Sensor Sensitivity | 0 | Changes the sensitivity of the exhaust gas sensor. | -2, -1, 0, +1, +2 |
Auto A/C Mode | On | Enables or disables the function which automatically turns the air conditioning on according to the state of the AUTO switch. | On or Off |
Efficient Ventilation Mode* | On | Enables or disables the function which automatically switches between recirculation and fresh air modes when the AUTO switch is on. | On or Off |
*: except Mid-East
CUSTOMIZE SEAT BELT WARNING SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Combination Meter / Utility / Customize / Warning.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Seat belt Warning | D/P | Function to sound the driver seat belt and passenger seat belt warning buzzer | D/P ON, D ON, P ON, D/P OFF | No. 1 meter ECU sub-assembly |
Tech Tips
This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.
CUSTOMIZE THEFT DETERRENT SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Security or Wireless Door Lock.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Warning by Horn*1 | ON | Function that allows vehicle horns and theft deterrent horn to be used as warning device. | ON / OFF | Certification ECU |
Intrusion Sensor Sensitivity Level*2 | N+Sound | Sets the sensor sensitivity for operating the alarm when an intrusion is detected.
Note Using any settings other than N+Sound, Normal and Low is prohibited. |
Highest / High / Normal / N+Sound / Low / Lowest | |
Intrusion Win Opened | OFF | Sets the sensitivity of the intrusion sensor when the windows are opened. | ON / OFF |
*1: except Europe
*2: w/ Emergency Call Switch
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Panic Function* | ON | This function operates the theft deterrent system when the panic switch is pressed and held for 1.5 seconds. | ON / OFF | Certification ECU |
*: w/ Panic Switch
CUSTOMIZE LIGHTING SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Utility / Customize / (desired system).
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
AFS Function | ON | This function controls the AFS. | ON / OFF |
Display | Default | Contents | Setting |
---|---|---|---|
AHS Function | ON | Function to turn the adaptive high beam system on and off. Operates as the automatic high beam system when turned off. | ON / OFF |
AFS Function | ON | This function controls the AFS. | ON / OFF |
AHS Operation Pattern Setting | Pattern 1 | Operation sensitivity of adaptive high beam system
|
Pattern 1 / Pattern 2 / Pattern 3 / Pattern 4 |
Residential Area Mode Setting*2 | - | - | - |
Note
*1: Patterns 3 and 4 are not used outside of the Middle East.
*2: This item does not have a function, so it is not possible to customize.
Display | Default | Contents | Setting |
---|---|---|---|
Lighting Time | 15 s | Function to change the lighting time after closing the door. (It will quickly fade out in case of turning the power switch on [IG]) |
7.5 s / 15 s / 30 s |
I/L when ACC OFF | ON | Function to light the interior light when the power switch is operated from on (IG or ACC) to off | ON / OFF |
I/L ON W/Door Key Unlock | ON | Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. | ON / OFF |
Room Light when Aprchd | ON | Dome light, clock illumination and instrument panel illumination (when approaching vehicle) | ON / OFF |
Inside Foot Light | ON | Interior foot light and inside handle illumination | ON / OFF |
Center Console Spot Light | ON | Center console spot light | ON / OFF |
Mirr-Foot-Lgt Approached | ON | Door mirror foot light (when approaching vehicle) | ON / OFF |
Mirr-Foot-Lgt Unlocked | ON | Door mirror foot light (when unlocking doors) | ON / OFF |
S-Belt-Bkl-Lgt/Door Open | ON | Seat belt buckle illumination (when door is open) | ON / OFF |
S-Belt-Bkl-Lgt/ACC OFF | ON | Seat belt buckle illumination (when electrical accessories are OFF) | ON / OFF |
Mirror Foot Light Time | 15 s | Door mirror foot light illumination duration | 0 s / 7.5 s / 15 s / 30 s |
Light Control | ON | Function to light up door inside handle light and instrument panel illumination when the power switch is on (IG) and shift position is not P | ON / OFF |
Interior Light Control | ON | This function controls the interior lights. | ON / OFF |
Exterior Light Control | ON | This function controls the door mirror foot lights. | ON / OFF |
Instrument Panel Illumination Pattern | Pattern 1 | Function to change the illumination pattern of instrument panel illumination.
|
Pattern 1 / Pattern 2 / OFF |
Display | Default | Contents | Setting |
---|---|---|---|
Disp Ex ON Sen | NORMAL | Function to change the level of ambient light at which the system dims lights such as the combination meter indicator light, the A/C indicator light and the clock light*3 | LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 |
Disp Ex OFF Sen | NORMAL | Function to change the level of ambient light at which the system cancels the dimming of lights such as the combination meter indicator light, the A/C indicator light and the clock light*4 | LIGHT2 / LIGHT1 / NORMAL / DARK1 / DARK2 |
Light Auto OFF Delay*1 | 30 s | Function to keep on lighting the headlight for a certain period of time after closing all the doors with the power switch turned from on (IG) to off under the condition that the headlight dimmer switch is at HEAD or AUTO with the headlight ON | OFF / 30 s / 60 s / 90 s |
Sensitivity | Normal | Function to adjust the ambient light sensitivity of the automatic light control system*5 | Light2 / Light1 / Normal / Dark1 / Dark2 |
Lane CHG Flash CNT | 3 times | Lane change flasher system | OFF / 3 times / 5 times / 7 times / 9 times / 11 times |
Follow Me Home Lighting Time*2 | 30 s | Changes the low beam headlight lighting time when power switch is off and headlight dimmer switch is pulled to flash headlights once. | 30 s / 60 s / 90 s / 120 s |
Light up Clearance Lights at Door Unlock Function | ON | A function that turns on the clearance lights, taillights, and license plate lights for 15 seconds when the doors are unlocked by an entry unlock operation or wireless unlock operation. | ON / OFF |
*1: w/ Light Auto Turn-off Delay Function
*2: w/ Follow Me Home System
Tech Tips
The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.
System Setting | |||||
Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
Tech Tips
When the setting is closer to the "Light" side, the system dims the indicator lights even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before dimming the indicator lights.
System Setting | |||||
Setting | DARK2 | DARK1 | NORMAL | LIGHT1 | LIGHT2 |
Tech Tips
When the setting is closer to the "Dark" side, the system cancels the dimming of the indicator lights even when the surrounding area is relatively dark. When the setting is closer to the "Light" side, the system waits until the surrounding area is brighter before canceling the dimming of the indicator lights.
System Setting | |||||
Setting | Dark2 | Dark1 | Normal | Light1 | Light2 |
Tech Tips
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
Door Linked Map Light and Personal Light Illumination Control
Mode 1: When door is opened, map light of opened door illuminates, or personal light illuminates
Mode 2: When door is opened, all map lights and personal lights illuminate
Mode 3: Map lights and personal lights are not linked to doors
To change modes, press the map light assembly DOOR and ON switch simultaneously, and then turn the power switch from off to on (IG). Each power switch off to on (IG) operation will change the mode (Mode 1 → Mode 2 → Mode 3 → Mode 1).
Tech Tips
After changing modes, the map light responds by blinking as follows: Mode 1: once; Mode 2: twice; Mode 3: three times.
Customizing Function with Multi-display
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle settings / Vehicle customization / Lights settings.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Light sensor sensitivity | 0 (middle bar) |
Adjusts the ambient light sensitivity of the automatic light control system.*2 | -2, -1, 0, +1 or +2 |
Headlamps auto-off timer*1 | 30 sec. | Function to continue illuminating headlights for a certain period of time after closing driver door with the power switch turned from on (IG) to off under the condition that the headlight dimmer switch is in the AUTO position with the headlights on. | Off, 30 sec., 60 sec. or 90 sec. |
Interior lights off timer | 15 sec. | This function controls the interior lights. | Off, 7.5 sec., 15 sec. or 30 sec. |
Exterior lights off timer | 15 sec. | This function controls the exterior lights. | Off, 7.5 sec., 15 sec. or 30 sec. |
*1: w/ Light Auto Turn-off Delay Function
Tech Tips
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
System Setting | |||||
Setting | -2 | -1 | 0 | +1 | +2 |
Tech Tips
When the setting is closer to the "Light" side, the system turns the lights on even when the surrounding area is relatively bright. When the setting is closer to the "Dark" side, the system waits until the surrounding area is darker before turning on the lights.
Enter the following menus: Setup / Vehicle / Vehicle settings / Vehicle customization / Other vehicle settings.
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Lane change signal flashes | 3 | Lane change flasher system | Off / 3 / 5 / 7 / 9 / 11 |
Tech Tips
The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.
CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize setting.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Auto Unlock/Shift (Unlock w/ power switch on (IG), shift P, speed 0 km/h (0 mph)) |
ON*3 OFF*4 |
Function that unlocks all doors when lever is shifted to P from any position other than P while the power switch is on (IG) | ON/OFF | Main body ECU (Driver side junction block) |
All Unlock/Open-Close (All unlock w/ D door open-close) |
OFF | Function that unlocks all other doors when opening driver door within 45 seconds after turning the power switch is on (IG) | ON/OFF | Main body ECU (Driver side junction block) |
Unlock Key Twice (Unlock w/ 2 times D key operation) |
OFF*1 ON*2 |
Function that unlocks only driver side door when driver side door key cylinder is turned to unlock once, and unlock all doors when it is turned to unlock twice. For OFF setting, turning it once unlocks all doors. | ON/OFF | Main body ECU (Driver side junction block) |
Auto Lock/Shift (Auto lock/shift not P) |
OFF | With engine running and all doors closed, function that locks all doors when lever is shifted to P from any position other than P | ON/OFF | Main body ECU (Driver side junction block) |
Auto Lock | ON | Function that locks all doors when vehicle speed reaches a certain level | ON/OFF | Main body ECU (Driver side junction block) |
*1: for Europe, China
*2: except Europe, China
*3: for China
*4: except China
Customizing with the Accessory meter assembly
Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Auto Lock by Speed | On | Function that locks all doors when the vehicle speed reaches a certain level | On or Off | Main body ECU (Driver side junction block) |
Auto Lock by Shift from P | Off | Function that locks all doors when the shift lever is moved out of P, with the power switch on (IG) and all doors closed | On or Off | Main body ECU (Driver side junction block) |
Auto Unlock by Shift to P | On*3 Off*4 |
Function that unlocks all doors when the shift lever is moved to P from any position other than P with the power switch on (IG) | On or Off | Main body ECU (Driver side junction block) |
Auto Unlock by Driver Door | Off | Function that unlocks the other doors when the driver door is opened within 45 seconds after the power switch is turned off | On or Off | Main body ECU (Driver side junction block) |
Unlock on Second Key Turn | Off*1 On*2 |
Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the Off setting, turning it once unlocks all doors | On or Off | Main body ECU (Driver side junction block) |
*1: for Europe, China
*2: except Europe, China
*3: for China
*4: except China
CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to record the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
Display (Item) | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Hazard Answer Back | ON | When LOCK switch on transmitter is pressed, this function illuminates hazard warning lights once. When UNLOCK switch is pressed, hazard warning lights illuminate twice | ON/OFF | Main body ECU (Driver side junction block) |
Wireless Control | ON | Function that turns wireless door lock function ON or OFF | ON/OFF | Main body ECU (Driver side junction block) |
Open Door Warning (door ajar warning)*1 | ON | If door is not completely closed and transmitter LOCK switch is pressed, this function makes buzzer sound for 10 seconds | ON/OFF | Main body ECU (Driver side junction block) |
Trunk Lid Operation | 0.8 s | This function changes transmitter operation method for opening luggage compartment door | 1 tim ON/2 tim ON/0.8 s/Prohibit | Main body ECU (Driver side junction block) |
Unlock 2 Operation | ON*3 OFF*2 |
Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. | ON/OFF | Main body ECU (Driver side junction block) |
Auto Lock Time | 30 s | Function to change time until relocking after unlocking with wireless door lock function | 30 s/60 s/120 s | Main body ECU (Driver side junction block) |
*1: except China
*2: for Europe and China
*3: except Europe and China
Customizing with the Accessory meter assembly
Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Remote 2-Press Unlock | On*1 Off*2 |
Function that unlocks driver door when unlock switch on electrical key transmitter sub-assembly is pressed once, and unlocks all doors when pressed twice. If setting is Off, pressing unlock switch once makes all doors unlock | On or Off | Main body ECU (Driver side junction block) |
Auto Relock Timer | 30 sec. | Function that regulates the interval between unlocking and automatic relocking of doors | 120 sec., 60 sec., 30 sec. or Off | Main body ECU (Driver side junction block) |
Lock/Unlock Feedback-Lights | On | When the doors are locked by wireless operation, the hazard warning lights flash once. When the doors are unlocked by wireless operation, the hazard warning lights flash twice | On or Off | Main body ECU (Driver side junction block) |
Lock Feedback Volume | 5 Bars | Wireless door lock buzzer volume | 0, 1, 2, 2, 4, 5, 6 or 7 Bars | Certification ECU |
*1: except Europe and China
*2: for Europe and China
CUSTOMIZE ENTRY AND START SYSTEM (for Entry Function)
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current setting before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch ON (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Utility / Customize.
Select the setting by referring to the table below.
Display (Item) | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Park Wait Time (Waiting time to permit unlocking door after locking) | 2.5s | Function that sets waiting time to permit unlocking door after door is locked with entry lock function | 0.5s, 1.5s, 2.5s or 5s | Certification ECU |
Ignition Available Area (Entry ignition available area.) | All | Function that sets the area that the key must be in before the power switch can be operated. | Front or All | Certification ECU |
Trunk Open Mode (Luggage compartment door open mode when vehicle is locked) | ON | Function to permit opening luggage compartment door | ON or OFF | Certification ECU |
Display (Item) | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Key Low Battery Warning (Warn when key battery becomes weak) | ON | Function that warns driver that key's battery power is low | ON or OFF | Certification ECU |
Customizing with the Multi-display
Turn the power switch ON (IG).
Enter the following menus: SET UP/ Vehicle / Vehicle Customization / Door Lock Settings.
Select the setting by referring to the table below.
Display (Item) | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Select Doors to Unlock | Driver's Door | Function that sets which doors are unlocked by the entry unlock function. | All, Each Door , Driver's Door or Side Doors | Certification ECU |
Entry and start system | On | Function that enables or disables the entry and start system. | On or Off | Certification ECU |
CUSTOMIZE METER / GAUGE SYSTEM
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Warning or Display.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Key Remind Volume | Large | Function to change the key reminder buzzer sound volume | Large, Medium or Small | No. 1 meter ECU |
Key Remind Sound | Normal | Function to change the key reminder buzzer sound frequency | Normal, Fast or Slow | No. 1 meter ECU |
Seat Belt Warning* | D/P ON | Function to change the seat belt warning buzzer setting | D/P ON, D ON, P ON or D/P OFF | No. 1 meter ECU |
*: This setting is only valid for the buzzer which sounds at 20 km/h (12 mph) or more
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
ODO Display Time After IG OFF Setting | 30 s | Function to change the odometer display time | 30 s, 60 s, 600 s or OFF | No. 1 meter ECU |
Customizing with the combination meter
Turn the power switch on (IG).
Enter the following menus: Settings.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Language | American English | Function to change the multi-information display language | American English, Francais, Deutsch, Espanol, Italiano or pyccknn | No. 1 meter ECU |
Units | km (L/100km) | Function to change the multi-information display unit | km (km/L) or km (L/100km) | No. 1 meter ECU |
ECO lamp | ON (Self-lighting) | Function to turn on/off the eco light setting | ON (Self-lighting), OFF or ON (Always) | No. 1 meter ECU |
Drive monitor | Cruising range | Function to change the drive monitor setting | Fuel consumption or Cruising range | No. 1 meter ECU |
Tachometer Settings | ON (Self-changing) | Function to change the tachometer or hybrid system indicator setting | ON (Self-changing), HV Meter (Always) or Tachometer (Always) | No. 1 meter ECU |
Lamp brightness | Standard | Function to change the meter illumination setting | Bright or Standard | No. 1 meter ECU |
EV driving Indicator | ON | Function to turn on/off the EV indicator light setting | ON or OFF | No. 1 meter ECU |
SPORT lamp | ON | Function to turn on/off the sport light setting | ON or OFF | No. 1 meter ECU |
Default settings | OFF | Function to turn on/off the default setting | ON or OFF | No. 1 meter ECU |
CUSTOMIZE LEXUS PARKING ASSIST-SENSOR SYSTEM
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the LEXUS parking assist-sensor system on.
Turn the intelligent tester on.
Enter the following menus: Body Electrical / Utility / Customize / Warning, Sensor or Display
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Fr Sensor Onset Range | Wide | Function to set buzzer activation range (for front sensors) | Narrow or Wide | Clearance warning ECU |
Rr Sensor Onset Range | Wide | Function to set buzzer activation range (for rear sensors) | Narrow or Wide | Clearance warning ECU |
Keep Sense Buzzer | Avail | Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds | Not Avail or Avail | Clearance warning ECU |
Fr & Rr Buzzer Freq | Middle | Buzzer sounding frequency | Low, Middle or High | Clearance warning ECU |
Fr & Rr Buzzer Volume | M2 | Buzzer volume setting | L, M1, M2, M3 or H | Clearance warning ECU |
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Sensor Condition N | Avail | Function to make sensors available when shift position is N | Not Avail or Avail | Clearance warning ECU |
Front Side Dist Sensor | Long | Function to set buzzer activation range (for front sensors) | Short or Long | Clearance warning ECU |
Reverse Range Front Sensor | Fsde | Operation setting for vehicle front sensors (front center, front corner, front side) when shift lever is in R position | F, Fs,Fc, Fsde or F Stop | Clearance warning ECU |
Non P/R Range Rear Sensor | R Stop | Operation setting for vehicle rear sensors (rear center, rear corner) when shift lever is in position other than P or R | R, Rcrn or R Stop | Clearance warning ECU |
Display | Default | Contents | Setting | Relevant ECU |
---|---|---|---|---|
Approach Display OFF | Avail | Display when moving away from previously detected obstacle | Not Avail or Avail | Clearance warning ECU |
Display Mode | All | Display mode setting (when LEXUS parking assist-sensor system is normal) | All or Undisp | Clearance warning ECU |
Customizing with Accessory Meter
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Turn the power switch on (IG).
Turn the LEXUS parking assist-sensor system on.
Enter the following menus: Setup / Vehicle / LEXUS Park Assist.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Alert volume | 3 | Sets the buzzer activation range for the rear center sensors. | 1, 2, 3, 4 or 5
|
Clearance warning ECU |
Display | On | The display mode setting (when the LEXUS parking assist-sensor system is normal). | On or Off | Clearance warning ECU |
Distance | Wide | Sets the buzzer activation range for the rear center sensors. | Narrow or Wide
|
Clearance warning ECU |
CUSTOMIZE POWER WINDOW CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure the function(s) can be customized.
Be sure to make note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch ON (IG).
Turn the tester on.
Enter the following menus:
Select: Body / Utility / Customize.
Select the setting by referring to the table below.
Display (Item) | Default | Contents | Setting |
---|---|---|---|
Door Key P/W Up | ON | Function that raises all power windows when, with engine switch off, key is used to hold driver door key cylinder to lock position for more than 2.3 seconds | ON/OFF |
Door Key P/W Down | ON | Function that lowers all power windows when, with engine switch off, key is used to hold driver door key cylinder to unlock position for more than 2.3 seconds | ON/OFF |
P/W Down W/ Transmit | OFF | Function that lowers all power windows when, with engine switch off, unlock switch on key is pressed and held for more than 3.0 seconds | ON/OFF |
P/W Up W/ Smart | ON | Function that raises all power windows when, with engine switch off, entry lock switch on driver side door outer handle is pressed and held for more than 3.0 seconds | ON/OFF |
P Window Auto Up | Avail | This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly (for front passenger side). | Avail/Not Avl |
P Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly. | Avail/Not Avl |
RR Window Auto Up | Avail | This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear RH side). | Avail/Not Avl |
RR Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly. | Avail/Not Avl |
RL Window Auto Up | Avail | This function is used to enable or disable the auto up function using the power window regulator switch assembly (for rear LH side). | Avail/Not Avl |
RL Window Auto Up From Driver | Avail | This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly. | Avail/Not Avl |
CUSTOMIZE POWER MIRROR CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Utility / Customize / Others.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Reverse Coupled Actuation Mirror Angle (D-Side) | User Setting | Function that turns the door mirror reverse shift-linked function default setting or user setting | Default Setting or User Setting |
|
Reverse Coupled Actuation Mirror Angle (P-Side) | User Setting | Function that turns the door mirror reverse shift-linked function default setting or user setting | Default Setting or User Setting |
|
*1: for LHD
*2: for RHD
CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Record the current settings before customizing.
Customizing with the intelligent tester.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Seat.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Seat Travel Distance*1 | Noraml | Function to change the Seat Travel Distance. | OFF, Short or Noraml | Main body ECU (Driver side junction block) |
Slide Link Cushion Length Ctrl*1 | Avl | Function to the physique compensation Cushion Length control when D-Seat is slide. | Not Avl or Avl | Front power seat switch |
Slide Link Hdrest Length Ctrl* | Avl | Function to the physique compensation head-rest control when D-Seat is slide. | Not Avl or Avl | Front power seat switch |
R&A Lumbar Support Oper*1 | ON | When the "Return & Away" operates, the function that "Lumbar Support" operates is stopped when it is "OFF". | ON or OFF | Front power seat switch |
P-Seat Auto Pattern*2 | Auto-B | Function to select the order of movement when P-seat auto moves. | Auto-A, Auto-B or Auto-C | No. 2 console switch |
Relax with P-Seat Lift*2 | Avail | Function to lift up P-seat when P-seat auto moves. | Not Avl or Avail | No. 2 console switch |
*1: for Driver Side
*2: for Passenger Side
Customizing with the accessory meter
Turn the power switch on (IG).
Enter the following menus: SET UP / Vehicle / Vehicle Customization / Other vehicle settings.
Select the setting by referring to the table below.
Display | Default | Content | Setting | Relevant ECU |
---|---|---|---|---|
Driver's seat easy exit | Full | Allows customization of the seat movement distance for the power easy access system. | Full, Partial or Off | Main body ECU (Driver side junction block) |
CUSTOMIZE SEAT HEATER SYSTEM
Customizing Function with intelligent tester
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Seat.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant |
---|---|---|---|---|
Rear Right Seat Heater Sensitivity Adjust | 0 | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | -2/-1/0/+1/+2 | Climate control ECU |
Rear Right Seat Heater Auto Function | Automatic | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | OFF or Automatic | Climate control ECU |
Rear Left Seat Heater Sensitivity Adjust | 0 | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | -2/-1/0/+1/+2 | Climate control ECU |
Rear Left Seat Heater Auto Function | Automatic | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | OFF or Automatic | Climate control ECU |
Customizing using the accessory meter assembly
Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.
Select the setting by referring to the table below:
Display | Default | Contents | Setting | Relevant |
---|---|---|---|---|
Auto Seat HTR Temp. RR L | 0 | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat HTR Temp. RR R | 0 | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat HTR RR L Default | ON | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | ON/OFF | Climate control ECU |
Auto Seat HTR RR R Default | ON | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | ON/OFF | Climate control ECU |
CUSTOMIZE CLIMATE CONTROL SEAT SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the intelligent tester
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Seat.
Select the setting by referring to the table below.
Display | Default | Contents | Setting | Relevant |
---|---|---|---|---|
Front Right Seat A/C Sensitivity Adiust | Normal | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | +2 C, +1 C, Normal, -1 C, -2 C | Climate control ECU |
Front Right Auto Quick Seater Heater Function | ON | ON/OFF setting of the fast acting seat heater | OFF / ON | Climate control ECU |
Front Right Auto Quick Seater Heater Quick Timer Adjust | ON | Timer setting when the heater is on | OFF / ON | Climate control ECU |
Front Left Seat A/C Sensitivity Adiust | Normal | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | +2 C, +1 C, Normal, -1 C, -2 C | Climate control ECU |
Front Left Auto Quick Seater Heater Function | ON | ON/OFF setting of the fast acting seat heater | OFF / ON | Climate control ECU |
Front Left Auto Quick Seater Heater Quick Timer Adjust | Normal | Timer setting when the heater is on | STD, Shot, Long | Climate control ECU |
Rear Right Seat A/C Sensitivity Adiust | ON | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | OFF / ON | Climate control ECU |
Rear Right Seat A/C Auto Function | Automatic | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | OFF / Automatic | Climate control ECU |
Rear Right Auto Quick Seater Heater Function | ON | ON/OFF setting of the fast acting seat heater | OFF / ON | Climate control ECU |
Rear Right Auto Quick Seater Heater Quick Timer Adjust | ON | Timer setting when the heater is on | OFF / ON | Climate control ECU |
Rear Left Seat A/C Sensitivity Adiust | Normal | When in AUTO, this function automatically adjusts the temperature of the seat climate control. | +2 C, +1 C, Normal, -1 C, -2 C | Climate control ECU |
Rear Left Seat A/C Auto Function | Automatic | This function allows the rear seat climate control setting to be selected when the power switch is on (IG). | OFF or Automatic | Climate control ECU |
Rear Left Auto Quick Seater Heater Function | ON | ON/OFF setting of the fast acting seat heater | OFF / ON | Climate control ECU |
Rear Left Auto Quick Seater Heater Quick Timer Adjust | ON | Timer setting when the heater is on | OFF / ON | Climate control ECU |
Customizing using the Accessory meter
Turn the power switch on (IG).
Enter the following menus: Setup / Vehicle / Vehicle Customization / Climate Settings /.
Select the setting by referring to the table below:
Display | Default | Contents | Setting | Relevant |
---|---|---|---|---|
Auto Seat A/C HTER Temp. FR L | 0 | The sensitivity setting for the seat when in Auto | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat A/C HTER Temp. FR R | 0 | The sensitivity setting for the seat when in Auto | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat A/C HTER Temp. RR L | 0 | The sensitivity setting for the seat when in Auto | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat A/C HTER Temp. RR R | 0 | The sensitivity setting for the seat when in Auto | -2/-1/0/+1/+2 | Climate control ECU |
Auto Seat A/C HTR RR L Default | OFF | The climate control operation setting for the seat when in Auto | OFF / ON | Climate control ECU |
Auto Seat A/C HTR RR R Default | OFF | The climate control operation setting for the seat when in Auto | OFF / ON | Climate control ECU |
CUSTOMIZE POWER TRUNK LID SYSTEM
Tech Tips
The following item can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Customize Setting / Back Door or Door Lock.
Select the setting by referring to the table below:
Display | Default | Contents | Setting |
---|---|---|---|
PBD Power Operation | ON | Turns power trunk opener and closer function ON or OFF. | ON or OFF |
Display | Default | Contents | Setting |
---|---|---|---|
PBD Power Operation | ON | Function that opens the luggage compartment door when the luggage electrical key switch is pressed and all doors are unlocked. | ON / OFF |
CUSTOMIZE REAR SUNSHADE SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch ON (IG).
Turn the tester on.
Enter the following menus:
Select: Body / Main Body / Utility / Customize /
Select the setting by referring to the table below.
Display | Default | Contents | Setting |
---|---|---|---|
Rear Shade Delay Time | 0.7 s | Function to adjust reverse-linked sunshade lowering function's response time | 0.7 s / 1.2 s / 0.9 s / 0.0 s |
R-pos to Rear Sun Shade COM | ON | Reverse linked function | ON or OFF |
CUSTOMIZE SLIDING ROOF SYSTEM
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Connect the intelligent tester to the DLC3.
Turn the power switch ON (IG).
Turn the tester on.
Enter the following menus:
Select: Body / Sliding Roof / Utility / Customize /
Select the setting by referring to the table below.
Display (Item) | Default | Contents | Setting |
---|---|---|---|
Door Key Related (Open) |
ON | Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when power switch is OFF | ON / OFF |
Door Key Related (Close) |
ON | Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when power switch is OFF | ON / OFF |
Wireless Key Rel (Open) |
ON | Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 3 seconds or more when power switch is OFF | ON / OFF |
Wireless Key Rel (Close) |
ON | Function to manually close sliding roof linked with power window if pressing transmitter LOCK switch for 3 seconds or more when power switch is OFF | ON / OFF |
Door Handle Lock Button | ON | Function to manually close sliding roof linked with power window if pushing door lock switch for 3 seconds or more when power switch is OFF and key is outside vehicle | ON / OFF |
Door Key Rel Operation | SLIDE | Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when power switch is OFF | TILT / SLIDE |
Wireless Key Rel Operation | SLIDE | Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by pressing on transmitter UNLOCK switch for 3 seconds or more when power switch is OFF | TILT / SLIDE |