SMART ENTRY AND START SYSTEM (for Entry Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SMART ENTRY AND START SYSTEM (for Entry Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Entry&Start.

      5. Select the setting by referring to the table below.

        Entry&Start
        Display Default Content Setting Relevant ECU
        Door Unlock Mode2 All Function that chooses the doors to be operated by entry unlock operation. All, Driver Certification ECU (smart key ECU assembly)
        Auto Entry Cancel SW OFF Function that enables or disables the smart entry and start system. OFF, ON Certification ECU (smart key ECU assembly)
        Wireless Buzzer Volume Setting Level5 Wireless buzzer answer back volume. OFF, Level7(MAX), Level6, Level5, Level4, Level3, Level2, Level1, Level0(Mute) Certification ECU (smart key ECU assembly)
    2. Entry cancel function (manual operation)

      Tech Tips

      While the smart entry and start system is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the engine switch.


      1. The following functions are disabled when the smart entry and start system is canceled.


        1. Entry unlock/lock functions

        2. Push start function

        3. Key lock-in prevention function

        4. Entry warning functions

      2. When canceling the system through manual operation:


        1. Make sure the following conditions are met:


          • The engine switch is off.

          • The driver door is closed.

          • The driver door is unlocked.

        2. Press the unlock button of the electrical key transmitter sub-assembly.

        3. Open the driver door within 5 seconds of completing the step above (driver door: close condition → opened).

        4. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

          Note

          If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

        5. Close and open the driver door twice completing the above step (driver door: open condition → closed → opened → closed → opened).

        6. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times completing the step above.

          Note

          If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

        7. Close and open the driver door completing the step above (driver door: open condition → closed → opened).

        8. Close the driver door within 5 seconds of completing the above step.

        9. Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart entry and start system has been canceled.

          Tech Tips

          Finish the step 5 to 7 within 30 seconds.

      3. Perform the following procedure to restore the smart entry and start system to the active state from the canceled state.


        1. Perform the procedures to cancel the smart entry and start system again.

        2. Check that the wireless buzzer sounds once (short beep) to confirm that the smart entry and start system has been restored to the active state.

          Tech Tips


          • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.

          • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.