REMOVE EXHAUST TAILPIPE ASSEMBLY
Remove the 2 bolts.
Disconnect the tailpipe from the center exhaust pipe and remove the gasket.
Remove the tailpipe from the exhaust pipe support.
REMOVE CENTER EXHAUST PIPE ASSEMBLY
Remove the 2 bolts and 2 compression springs.
Disconnect the center exhaust pipe from the 3 exhaust pipe supports.
Remove the gasket.
REMOVE AIR TUBE COVER
Remove the 2 bolts.
Detach the 2 clips and clamp, and remove the air tube cover.
REMOVE AIR FUEL RATIO SENSOR
Disconnect the air fuel ratio sensor connector and detach the clamp.
Using SST, remove the air fuel ratio sensor from the front exhaust pipe.
REMOVE FRONT EXHAUST PIPE ASSEMBLY
Disconnect the exhaust gas temperature sensor connector and detach the clamp.
Disconnect the No. 2 exhaust gas temperature sensor connector and detach the 2 clamps.
Disconnect the No. 3 exhaust gas temperature sensor connector and detach the 2 clamps.
Disconnect the No. 1 exhaust pipe air hose and No. 7 exhaust pipe air hose from the front exhaust pipe.
Remove the 2 No. 4 exhaust pipe supports.
Remove the 3 nuts and front exhaust pipe.
Remove the gasket.
REMOVE EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.
REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.
REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.
REMOVE NO. 1 EXHAUST PIPE PROTECTOR
Remove the 3 bolts and No. 1 exhaust pipe protector.
REMOVE NO. 2 EXHAUST PIPE PROTECTOR
Remove the 2 bolts and No. 2 exhaust pipe protector.
REMOVE CATALYTIC CONVERTER BRACKET SUB-ASSEMBLY
Remove the bolt and catalytic converter bracket.