VEHICLE CONTRACT SETTING
Tech Tips
When replacing the multi-media module receiver assembly, it is not necessary to cancel the G-BOOK contract. (If cancelled a new G-BOOK contract needs to be created after replacement.)
If the multi-media module receiver assembly or telematics transceiver is replaced on vehicles that do not have a contract for the G-BOOK service, perform the vehicle contract setting.
If the multi-media module receiver assembly or telematics transceiver is replaced on vehicles that have a contract for the G-BOOK service, perform the vehicle contract setting and the procedure to resume the G-BOOK service and to start the emergency call service.
Check the ID before replacement (when diagnosis can be activated).
Tech Tips
If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
If the telematics transceiver is replaced, check the DCM ID.
Enter diagnostic mode Click here.
Select "Service Information" on the "Service Menu" screen.
Select "G-BOOK Info for Contract" on the "Service Information" screen.
Check the G-BOOK ID or DCM ID.
Tech Tips
The DCM ID is also specified on the telematics transceiver label.
Replace the multi-media module receiver assembly or telematics transceiver.
Replace the multi-media module receiver assembly or telematics transceiver at a dealership.
Check the ID after replacement.
Tech Tips
If the multi-media module receiver assembly is replaced, check the G-BOOK ID.
If the telematics transceiver is replaced, check the DCM ID.
Enter diagnostic mode Click here.
Select "Service Information" on the "Service Menu" screen.
Select "G-BOOK Info for Contract" on the "Service Information" screen.
Check the G-BOOK ID or DCM ID.
Tech Tips
The DCM ID is also specified on the telematics transceiver label.
Fill-in the Vehicle Contract Setting Request Form.
After filling in the Vehicle Contract Setting Request Form, fax it to the G-BOOK center.
Item | Information to Enter | Note |
---|---|---|
*1 | Enter the dealership name of the applicant. | Applicant information |
*2 | Enter the name of the applicant. | Applicant information |
*3 | Enter the fax number of the dealership. | Dealership information |
*4 | Enter the phone number of the dealership. | Dealership information |
*5 | Enter the VIN of the vehicle. | Vehicle information |
*6 |
|
Used as change-request information from the dealership |
*7 |
|
Used as change-request information from the dealership |
*8 |
|
Used as change-request information from the dealership |
*9 |
|
Used as change-request information from the dealership |
*10 |
|
Used as change-request information from the dealership |
*11 | Enter the mileage on the odometer when the multi-media module receiver assembly is replaced. | Used as change-request information from the dealership |
*12 | Enter the date that the mileage was recorded. | Used as change-request information from the dealership |
Perform the procedure to resume the G-BOOK service.
Tech Tips
The screen illustrations provided are samples only and may be different from actual screens.
Perform the operations shown in the illustration and select G-BOOK.com.
Check that G-BOOK.com is displayed.
After the guidance screen is displayed, perform the procedure to resume the G-BOOK service by following the instructions on the screen.
Perform the procedure to start the emergency call service.
After completing the procedure to resume the G-BOOK service, perform the procedure to start the emergency call service by following the instructions on the screen.
Tech Tips
The emergency call service will be available when the procedure is completed successfully.