INSPECTION PROCEDURE
PROCEDURE
START DIAGNOSTIC MODE
Activate diagnostic mode and check if the "Service Menu" screen can be displayed Click here.
OK |
---|
Diagnostic mode can be activated. |
NG |
REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK) Click here |
OK |
CHECK PANEL SWITCH (OPERATION CHECK)
*a | Name of switch being pushed |
Enter the "Panel & Steering Switch Check Mode" screen. Refer to Check Panel & Steering Switch in Operation Check Click here.
Press each switch on the remote touch and check that the switch name is displayed on the screen.
OK |
---|
Pressing each switch displays its name on the screen. |
NG |
REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK) Click here |
OK |
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here
REMOTE TOUCH SELF CHECK (SWITCH OPERATION CHECK)
Activate self check mode Click here.
*a | Switch Illumination |
*b | Switch Knob |
Check switch operation.
Move the remote touch switch knob to the lower left.
Check that the "MAP/VOICE" and "MENU" switches illuminate when each switch on the remote touch is pressed.
Result | Proceed to |
---|---|
Self check mode cannot be activated. | A |
Some switches do not turn on the "MAP/VOICE" and "MENU" switch illumination when they are pressed. | A |
All switches turn on the "MAP/VOICE" and "MENU" switch illumination when they are pressed. | B |
B |
REPLACE MULTI-MEDIA MODULE RECEIVER ASSEMBLY Click here |
A |
CHECK REMOTE TOUCH (REMOTE OPERATION SWITCH)
Replace the remote operation switch Click here.
Check that each switch operation on the remote touch is accepted normally.
OK |
---|
Each switch operation is accepted normally. |
NG |
REPLACE REMOTE TOUCH (REMOTE OPERATION BOARD) Click here |
OK |
END (REMOTE TOUCH [REMOTE OPERATION SWITCH] IS DEFECTIVE)