DESCRIPTION
This DTC is stored when the hard disk drive which is built into the multi-media module receiver assembly has an initialization malfunction or read/write errors occur more than a specified number of times.
DTC No. | DTC Detection Condition | Trouble Area |
---|---|---|
B15B8 | Hard Disk Drive (HDD) malfunction | Hard disk drive |
INSPECTION PROCEDURE
Note
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System Click here.
PROCEDURE
CHECK HARD DISK DRIVE (OPERATION CHECK)
Enter the "HDD Check" screen. Refer to Check Hard Disk Drive in Operation Check Click here.
Select "HDD Check" and check the result.
OK |
---|
"OK" is displayed. |
Tech Tips
After "HDD Check" is selected, it may take a while until the result is displayed.
NG |
REPLACE HARD DISK DRIVE Click here |
OK |
CHECK DTC
Clear the DTCs Click here.
Recheck for DTCs and check that no DTCs are output.
OK |
---|
No DTCs are output. |
Tech Tips
The hard disk drive may be malfunctioning even if DTC B15B8 is not output.
NG |
REPLACE HARD DISK DRIVE Click here |
OK |
USE SIMULATION METHOD TO CHECK Click here