DESCRIPTION
This is the display signal circuit from the multi-media module receiver assembly to the television display assembly.
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
CHECK HARNESS AND CONNECTOR (MULTI-MEDIA MODULE RECEIVER ASSEMBLY - TELEVISION DISPLAY ASSEMBLY)
Disconnect the F77 multi-media module receiver assembly connector.
Disconnect the L61 television display assembly connector.
Measure the resistance according to the value(s) in the table below.
Standard Resistance | |||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
NG |
REPAIR OR REPLACE HARNESS OR CONNECTOR |
OK |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here