REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
Disconnect the 4 connectors.
Disengage the 2 claws as shown in the illustration and disconnect the 2 connectors (A).
Disconnect the 4 connectors (B).
Remove the 2 nuts.
Disengage the claw as shown in the illustration and disconnect the connector.
Disengage the 2 claws and release the connector lock as shown in the illustration.
Disengage the claw as shown in the illustration and disconnect the connector and remove the instrument panel junction block assembly.
REMOVE POWER MANAGEMENT CONTROL ECU
Remove the 2 nuts and power management control ECU.