REMOVE ENGINE ASSEMBLY
REMOVE NO. 4 MANIFOLD CONVERTER INSULATOR
Remove the 4 bolts and No. 4 manifold converter insulator.
REMOVE MANIFOLD CONVERTOR INSULATOR SUB-ASSEMBLY
Remove the bolt and manifold converter insulator.
REMOVE MANIFOLD STAY
Remove the bolt, nut and manifold stay.
REMOVE NO. 2 MANIFOLD STAY
Remove the 3 bolts and No. 2 manifold stay.
REMOVE NO. 2 EXHAUST MANIFOLD STAY
Remove the 2 bolts, nut and No. 2 exhaust manifold stay.
REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY
Disconnect the 2 connectors.
Remove the 3 nuts and exhaust manifold converter.
Remove the gasket from the turbocharger.
REMOVE VACUUM TRANSMITTING HOSE ASSEMBLY
REMOVE NO. 2 VACUUM TRANSMITTING HOSE ASSEMBLY
REMOVE EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Detach the sensor connector clamp.
Using a 14 mm union nut wrench, remove the sensor.
REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Detach the sensor connector clamp.
Using a 14 mm union nut wrench, loosen the union nut.
Remove the nut, clamp and sensor.
REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR
Note
If the sensor is dropped, replace it with a new one.
Detach the sensor connector clamp.
Using a 14 mm union nut wrench, remove the sensor.
REMOVE NO. 1 VACUUM PIPE
Using a 17 mm union nut wrench, loosen the union nut.
Remove the bolt and No. 1 vacuum pipe.
REMOVE NO. 2 VACUUM PIPE
Using a 14 mm union nut wrench, loosen the union nut.
Remove the bolt and No. 2 vacuum pipe.
REMOVE NO. 2 MANIFOLD CONVERTER INSULATOR
Remove the 3 bolts and No. 2 manifold converter insulator.