PRECAUTION
Note
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work. Click here.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
REMOVE INSTRUMENT PANEL FINISH PANEL END LH
for Automatic Air Conditioning System:
*1 | Protective Tape |
Put protective tape around the instrument panel finish panel end LH.
Using a moulding remover A, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end LH.
for Manual Air Conditioning System:
*1 | Protective Tape |
Put protective tape around the instrument panel finish panel end LH.
Using a moulding remover A, detach the 3 clips and guide, and remove the instrument panel finish panel end LH.
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
*1 | Protective Tape |
for Automatic Air Conditioning System:
Put protective tape around the instrument panel finish panel end RH.
Using a moulding remover A, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end RH.
*1 | Protective Tape |
for Manual Air Conditioning System:
Put protective tape around the instrument panel finish panel end RH.
Using a moulding remover A, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.
REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
Detach the 8 claws and 4 guides.
Disconnect the connector and remove the center instrument panel register.
REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio Receiver Type)
Remove the 4 screws.
Pull the radio receiver assembly with bracket to detach the 4 clips on the backside of the radio receiver assembly with bracket.
Disconnect the connectors and remove the radio receiver assembly with bracket.
REMOVE RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (w/ Audio, for Radio and Display Type)
Remove the 4 screws.
Pull the radio receiver and display receiver assembly with bracket to detach the 4 clips on the backside of the radio and display receiver assembly with bracket.
Disconnect the connectors and remove the radio and display receiver assembly with bracket.
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)
Detach the 4 clips, 3 claws and 3 guides, and remove the center instrument cluster finish panel.
REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)
Remove the 4 bolts and stereo opening cover.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Twist the shift lever knob in the direction indicated by the arrow and remove it.
REMOVE SHIFTING HOLE COVER (for Manual Transaxle)
*1 | T Washer |
Twist the T washer in the direction indicated by the arrow and remove it.
Remove the knob spring.
Detach the 5 claws and 3 clips, and remove the shifting hole cover.
REMOVE POSITION INDICATOR HOUSING ASSEMBLY (except Manual Transaxle)
Detach the 5 claws and 3 clips.
Disconnect the connector and remove the position indicator housing.
REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (except Manual Transaxle)
for Automatic Air Conditioning System:
Remove the 3 screws <C>.
Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.
Tech Tips
If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.
for Manual Air Conditioning System:
Remove the 3 screws <C>.
Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.
REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle)
for Automatic Air Conditioning System:
Remove the 2 screws <C>.
Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.
Tech Tips
If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.
for Manual Air Conditioning System:
Remove the 2 screws <C>.
Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.
REMOVE FRONT NO. 1 CONSOLE BOX INSERT
Detach the 3 claws and guide, and remove the front No. 1 console box insert.
REMOVE FRONT NO. 2 CONSOLE BOX INSERT
Detach the 3 claws and guide, and remove the front No. 2 console box insert.
REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Remove the screw <D>.
Disconnect the connector.
Detach the 4 clips and remove the lower No. 1 instrument panel finish panel.
REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY
Disconnect the connector.
Detach the 2 claws and remove the stereo jack adapter.