TRANSMITTER BATTERY (w/ Smart Entry and Start System) REPLACEMENT


  1. REMOVE TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. for Type A:


      1. A01EU51

        Push the release hook knob and extract the mechanical key.

      2. A01EV3ZE03
        Text in Illustration
        *a Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01EY9CE02
        Text in Illustration
        *a Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

    2. for Type B:


      1. A01EU51

        Push the release hook knob and extract the mechanical key.

      2. A01EV3ZE04
        Text in Illustration
        *a Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01ETJF

        Disengage the 2 claws and remove the cover.

      4. A01EWBGE02
        Text in Illustration
        *a Protective Tape

        Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

    3. for Type C:


      1. A01ESRZ

        Push the release hook knob and extract the mechanical key.

      2. A01EX4BE06
        Text in Illustration
        *a Protective Tape

        Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

        Tech Tips

        Tape the screwdriver tip before use.

      3. A01EV5T

        Remove the battery (lithium battery: CR2032).

        Note


        • Do not push the terminals with your finger.

        • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

        • Do not touch the transmitter battery with wet hands. Water may cause rust.

        • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter from being damaged.

        Tech Tips

        Tape the screwdriver tip before use.

  2. INSTALL TRANSMITTER BATTERY


    1. for Type A:


      1. A01EVT5

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01EXNP

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      3. A01ET01

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.
    2. for Type B:


      1. A01ETOY

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      2. A01EYMY

        Engage the 2 claws and install the cover.

      3. A01EXNP

        Install the transmitter housing cover by pressing down on it as shown in the illustration.

      4. A01ET01

        Insert the mechanical key into the transmitter.

      5. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.
    3. for Type C:


      1. A01EYOG

        Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

        Note


        • Do not bend the transmitter battery electrode during insertion.

        • Keep the transmitter cover interior free of dust and oil.

        • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter from being damaged.

      2. A01EVDQ

        Install the transmitter housing cover by pressing down on it as shown in the illustration

      3. A01ET7F

        Insert the mechanical key into the transmitter.

      4. Press one of the transmitter switches and check that the LED illuminates.

        OK
        Transmitter LED illuminates when switch is pressed.