INSPECT PURGE VSV
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
Tech Tips
When measuring the coil resistance, make sure that the surface temperature of the purge VSV is 20°C (68°F).
If the result is not as specified, replace the purge VSV.
Check the operation of the purge VSV.
*1 | Port E |
*2 | Port F |
*a | Does not flow |
Air pressure |
Check that air does not flow from port E to port F.
*1 | Port E |
*2 | Port F |
Air pressure |
Apply battery voltage to the connector and check the VSV operation.
OK | ||||
---|---|---|---|---|
|
If the result is not as specified, replace the purge VSV.