REAR POWER WINDOW SWITCH REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The procedure listed below is for the LH side.


  1. REMOVE DOOR ASSIST GRIP COVER


    1. A003ZX2

      Using a moulding remover, disengage the 6 claws, 2 clips and 3 guides, and remove the door assist grip cover.

  2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH REAR DOOR ARMREST BASE PANEL


    1. A0041MN

      Disengage the 7 claws and 2 guides.

    2. Disconnect the connector and remove the rear power window regulator switch assembly with rear door armrest base panel.

  3. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    1. A0042QA

      Disengage the 2 claws and remove the rear power window regulator switch assembly.