REMOVE FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure for the RH side and the LH side.
REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
Tech Tips
Use the same procedure for the RH side and the LH side.
REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Disengage the 3 claws.
Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.
REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Remove the 2 bolts <B> and 3 screws <E>.
Disengage the 4 claws and 3 clips.
Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.
REMOVE ECM (for RHD)
Disconnect the 6 ECM connectors.
Separate the 2 wire harness clamps (for LHD).
Remove the wire harness clamp (for RHD).
Remove the 2 nuts, bolt and ECM with the ECM bracket.
Remove the 4 screws and 2 ECM brackets from the ECM.
REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect each connector.
Remove the 2 screws and the air conditioning amplifier assembly.