INSTALL REAR SEAT ASSEMBLY RH
Temporarily install the 2 bolts on the front side of the seat.
Temporarily install the 3 bolts on the rear side of the seat.
w/ Rear Seat Side Airbag:
Connect the connector.
Install the rear seat assembly RH with the 5 bolts.
37 N*m | 377 kgf*cm | 27 ft.*lbf |
CONNECT REAR SEAT LOCK CABLE ASSEMBLY RH
When replacing the rear seat assembly RH or rear seat reclining control cable with a new one:
Connect the rear seat assembly RH or rear seat reclining control cable as shown in the illustration.
When replacing the rear seat lock cable assembly RH with a new one:
Engage the joint piece with the cable of the rear seat lock cable assembly RH.
Connect the rear seat lock cable assembly RH and connector case as shown in the illustration.
Push the lock pin of the connector case as shown in the illustration to connect the rear seat lock cable assembly RH.
When reusing the rear seat assembly RH, rear seat reclining control cable and rear seat lock cable assembly RH:
Connect the rear seat lock cable assembly RH as shown in the illustration.
Connect the rear seat lock cable assembly RH as shown in the illustration.
*1 | Seat Track Adjusting | *2 | Protective Tape |
Install the rear seat reclining control cable to the cover as shown in the illustration.
Connect the rear No. 1 seat lock cable assembly as shown in the illustration.
Return the seatback to the upright position.
Press the adjuster's lock piece to lock it as shown in the illustration.
*1 | Adjusters Spring | *2 | Lock Piece |
When pressing the lock piece, make sure the adjusters spring is not compressed.
Engage the guide.
Connect the No. 1 fold seat stopper band assembly with the bolt.
9.0 N*m | 92 kgf*cm | 80 in.*lbf |
Connect the rear seatback board carpet assembly RH with the 3 clips.
Connect the rear seatback board sub-assembly with the 2 clips.
INSPECT REAR SEAT SLIDE ADJUSTER LOCK
Check that the left and right adjusters lock simultaneously when sliding the seat.
If the left and right adjusters do not lock simultaneously, adjust by loosening the bolts securing the seat.
INSTALL REAR SEAT TRACK BRACKET COVER RH
Engage the 8 claws and install the 2 seat track bracket cover RH.
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
Install the rear seat headrest assembly as shown in the illustration.
INSTALL REAR SEAT HEADREST ASSEMBLY RH
Install the rear seat headrest assembly as shown in the illustration.