WASHER MOTOR INSTALLATION


  1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY


    1. A01G5FQ

      Install the windshield washer motor and pump assembly.

    2. Connect the connector.

    3. A01G4FL

      Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. Install the front fender liner RH with 2 new grommets.

    2. Using a 4 mm hexagon wrench, install the 3 hexagon screws.

    3. Install the 6 clips.

    4. Install the 4 screws and bolt.

    5. A01G7QKE01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the pin hold clip as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH


    1. Install the front wheel opening extension pad RH with the 3 screws.

  5. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1049 kgf*cm, 76 ft.*lbf }