INSPECT MASS AIR FLOW METER
*1 | Platinum Hot Wire (Heater) |
Perform a visual check for any foreign matter on the platinum hot wire (heater) of the mass air flow meter shown in the illustration.
OK |
---|
There is no foreign matter. |
If the result is not as specified, replace the mass air flow meter.
Check the intake air temperature sensor.
*1 | Resistance kΩ | *2 | Temperature °C (°F) |
*3 | Acceptable Range | - | - |
*a | Component without harness connected ( Mass air flow meter) |
- | - |
Measure the resistance according to the value(s) in the table below.
Standard Resistance | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the mass air flow meter.