Click here

БЛОК ДВИГАТЕЛЯ СНЯТИЕ

Click here
Click here Click here
  1. Click here

    REMOVE ENGINE WIRE

  2. Click here

    REMOVE FUEL HOSE


    1. Remove the fuel pipe clamp.

    2. A01ERYZ

      Disconnect the 2 clamps and remove the fuel hose (Click here).

  3. Click here

    REMOVE FUEL TUBE SUB-ASSEMBLY


    1. A01EO34

      Remove the 2 bolts and fuel tube (Click here).

  4. Click here

    REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 1)

    (Click here)

  5. Click here

    REMOVE AIR SWITCHING VALVE ASSEMBLY (for Bank 2)

    (Click here)

  6. Click here

    REMOVE NO. 4 AIR TUBE


    1. A01ERIM

      Remove the bolt and No. 4 air tube.

  7. Click here

    REMOVE NO. 3 AIR TUBE


    1. A01EQ0Q

      Remove the bolt and No. 3 air tube.

  8. Click here

    REMOVE NO. 2 WATER BY-PASS PIPE


    1. A01ERY3

      Disconnect the hose and remove the 2 bolts and No. 2 water by-pass pipe.

  9. Click here

    REMOVE NO. 8 WATER BY-PASS HOSE

  10. Click here

    DISCONNECT NO. 11 WATER BY-PASS HOSE

  11. Click here

    REMOVE NO. 1 WATER OUTLET PIPE


    1. A01EO2N

      Remove the 2 bolts and No. 1 water outlet pipe.

  12. Click here

    REMOVE NO. 1 EGR PIPE BRACKET


    1. A01ERNS

      Remove the 3 bolts and No. 1 EGR pipe bracket.

  13. Click here

    REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH


    1. A01EOV2

      Remove the 4 bolts and front No. 1 engine mounting bracket RH.

  14. Click here

    REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    1. A01ERTX

      Remove the 4 bolts and front No. 1 engine mounting bracket LH.

  15. Click here

    REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    1. A01ENBE

      Disconnect the No. 6 wire harness connector.

    2. Remove the 2 bolts and fuel delivery pipe.

      Note:

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the intake manifold.

  16. Click here

    REMOVE NO. 2 FUEL DELIVERY PIPE SUB-ASSEMBLY


    1. A01ENNE

      Disconnect the No. 7 wire harness connector.

    2. Remove the 2 bolts and No. 2 fuel delivery pipe.

      Note:

      When removing the delivery pipe, hold the pipe by both ends and pull it straight upward.

    3. Remove the 2 delivery pipe spacers and 4 insulators from the intake manifold.

  17. Click here

    REMOVE NO. 4 ENGINE COVER

  18. Click here

    REMOVE NO. 3 ENGINE COVER

  19. Click here

    REMOVE NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. A01EORJ

      Remove the 2 bolts.

    2. Disconnect the 4 hoses and remove the No. 2 water by-pass pipe.

  20. Click here

    REMOVE NO. 1 WATER BY-PASS HOSE


    1. A01EQ65

      Remove the No. 1 water by-pass hose.

  21. Click here

    REMOVE WATER PUMP PULLEY


    1. A01EOVUE01

      Using SST, hold the water pump pulley.

      09960-10010 09962-01000 09963-01000
    2. Remove the 4 bolts and water pump pulley.

  22. Click here

    REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY


    1. A01EOPU

      Remove the bolt and No. 1 idler pulley.

  23. Click here

    REMOVE FAN BRACKET ASSEMBLY


    1. A01EPZ1

      Remove the 5 bolts and fan bracket.

  24. Click here

    REMOVE SEPARATOR CASE


    1. A01EO23

      Выверните 4 болта и снимите корпус сепаратора.

  25. Click here

    REMOVE NO. 2 ENGINE COVER

  26. Click here

    REMOVE NO. 1 ENGINE COVER

  27. Click here

    REMOVE ENGINE WIRE


    1. A01EQ87

      Disconnect the 4 knock sensor connectors.

    2. Detach the 3 wire harness clamps.

    3. Remove the bolt and engine wire.

  28. Click here

    REMOVE NO. 11 WATER BY-PASS HOSE

  29. Click here

    REMOVE IGNITION COIL ASSEMBLY


    1. Remove the 8 bolts and 8 ignition coils.

  30. Click here

    REMOVE NOISE FILTER


    1. A01ESEB

      for Bank 1:

      Remove the bolt and noise filter from the cylinder head cover LH.

    2. A01EN9I

      for Bank 2:

      Remove the bolt and noise filter from the cylinder head cover RH.