INSPECT ENGINE SWITCH
Measure the resistance according to the value(s) in the table below.
Standard Resistance | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
If the result is not as specified, replace the engine switch.
Apply battery voltage to the terminals of the switch and check the illumination condition of the switch.
OK | ||||||||
---|---|---|---|---|---|---|---|---|
|
Note
If the positive (+) lead and negative (-) lead are incorrectly connected, the engine switch indicator will not illuminate.
If the voltage is too low, the indicator will not illuminate.
If the result is not as specified, replace the engine switch.