REMOVE COWL TOP VENTILATOR LOUVER
Remove the cowl top ventilator louver Click here.
REMOVE NO. 2 CYLINDER HEAD COVER
Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.
Note
Attempting to detach both front and rear clips at the same time may cause the cover to break.
REMOVE IGNITION COIL ASSEMBLY
Disconnect the 4 ignition coil connectors.
*1 | Cylinder Head Cover |
*2 | Spark Plug Tube |
*3 | Plug Cap |
Remove the 4 bolts and 4 ignition coils.
Note
When removing the ignition coil, do not damage the plug cap with the cylinder head cover opening or the upper edge of the spark plug tube.
REMOVE SPARK PLUG
Using a 14 mm spark plug wrench and 100 mm extension bar, remove the 4 spark plugs.