Tech Tips
Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
*1 | Protective Tape |
*2 | Clamp |
*3 | Guide |
Place protective tape as shown in the illustration.
Using a moulding remover B, detach the 2 clips and 5 claws.
Detach the clamp.
Detach the guide near the front of the vehicle and remove the finish panel.
REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY
Disconnect each connector.
Remove the screw.
Remove the air conditioning amplifier assembly as shown in the illustration.