AIR FUEL RATIO SENSOR REMOVAL


  1. REMOVE FRONT WIPER MOTOR AND LINK


    1. Remove the front wiper motor and link Click here.

  2. REMOVE OUTER COWL TOP PANEL


    1. A00DSK0

      Remove the 9 bolts and outer cowl top panel.

  3. REMOVE NO. 2 CYLINDER HEAD COVER


    1. A005W8Q

      Hold the rear of the cover and raise it to detach the 2 clips on the rear of the cover. Continue to raise the cover to detach the 2 clips on the front of the cover and remove the cover.

      Note

      Attempting to detach both front and rear clips at the same time may cause the cover to break.

  4. REMOVE AIR FUEL RATIO SENSOR


    1. A00DQ8P

      Disconnect the sensor connector and clamp.

    2. A00DUZAE01

      Using SST, remove the sensor from the exhaust manifold.

      SST
      09224-00010

      Note

      Do not damage the sensor.