REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
*1 | Stopper |
*2 | Glove Compartment Door Stopper |
Disengage the claw and release the glove compartment door stopper.
Bend portions (A) and (B) in the direction indicated by the arrows in the illustration to release the 2 stoppers, and lower the glove compartment door assembly until the front of the door is level.
*1 | Hinge |
Pull the glove compartment door assembly horizontally toward the rear of the vehicle to release the 2 hinges, and remove the glove compartment door assembly.
Note
Pulling the glove compartment door assembly upward to remove it will cause the hinges to deform when reinstalling the door. Be sure to pull out the compartment door horizontally.
REMOVE AIRBAG CUT-OFF SWITCH
Disconnect the connector.
Note
When disconnecting any airbag connector, take care not to damage the airbag wire harness.
Disengage the 2 claws and remove the airbag cut-off switch as shown in the illustration.