Tech Tips
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
REMOVE INSTRUMENT PANEL FINISH PANEL END LH
Pull the front part of the instrument panel finish panel end LH to detach the 6 clips.
Pull the instrument panel finish panel end LH to detach 3 clips and remove the instrument panel finish panel end LH.
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Lower the shift lever boot and disconnect it from the shift lever knob sub-assembly.
Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
REMOVE NO. 3 BOX PANEL
Detach the 4 claws and remove the No. 3 box panel.
REMOVE UPPER REAR CONSOLE PANEL
*1 | Protective Tape |
Apply protective tape as shown in the illustration.
Move the shift lever to N.
Remove the 2 screws.
Detach the 6 clips and remove the upper rear console panel sub-assembly.
Disconnect each connector and each wire harness clamp.
REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY
Disconnect the connector.
Detach the 6 claws to remove the integration control and panel assembly (power seat switch).