CHECK DTC AND FREEZE FRAME DATA (with Intelligent Tester)
Turn the ignition switch off, and connect the intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the tester on.
Enter the following menus: Chassis / Electric Parking Brake / DTC.
Check for DTCs.
Check the freeze frame data.
Tech Tips
For the freeze frame data confirmation procedure, refer to the following procedures Click here.
CLEAR DTC AND FREEZE FRAME DATA (with Intelligent Tester)
Turn the ignition switch off and connect the intelligent tester to the DLC3.
Turn the ignition switch to ON and turn the tester on.
Enter the following menus: Chassis / Electric Parking Brake / DTC.
Clear the DTCs.
Tech Tips
If DTCs are cleared, the freeze frame data is also cleared.
CHECK DTC (without Intelligent Tester)
Turn the ignition switch to ON.
*1 | Front view of DLC3 |
Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
Note
Do not connect the wrong terminals, as this will cause parts to be damaged.
Read the DTCs from the number of blinks of the PARK warning light.
Tech Tips
If the system is normal, the light blinks at 0.25 second intervals.
If DTCs are output, refer to the Diagnostic Trouble Code Chart Click here.
If there is only 1 DTC, the DTC is output with a 4.5 second pause in between outputs. If there are several DTCs, the DTCs are output with a 2.5 second pause in between each code. Once all of the DTCs are output, there is a 4.5 second pause and the DTCs are output again.
If 2 or more DTCs are output, the DTCs are output in ascending order.
CLEAR DTC (without Intelligent Tester)
Turn the ignition switch to ON.
*1 | Front view of DLC3 |
Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.
Note
Do not connect the wrong terminals, as this will cause parts to be damaged.
Within 5 seconds, push the electric parking brake switch repeatedly 5 times or more.
Note
If the electric parking brake switch is operated too fast, it may not respond. If it does not respond, perform the step again and operate the switch more slowly.
Check that the normal system code is output.
Tech Tips
If the malfunction continues, the DTC may not be clearable.