RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
Start the engine.
Turn the A/C switch on.
Operate the cooler compressor while the engine speed is approximately 1000 rpm for 5 to 6 minutes to circulate the refrigerant and collect the compressor oil remaining in each component into the cooler compressor.
Stop the engine.
Recover the refrigerant from the A/C system using a refrigerant recovery unit.
REMOVE LOWER CONSOLE BOX (w/o Console Box Lid)
REMOVE COOLING BOX ASSEMBLY (w/ Cool Box)
REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Cool Box)
REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY
Release the parking brake lever.
Disconnect the parking brake switch connector.
Remove the adjusting nut.
Remove the parking brake return spring.
Disconnect the No. 2 parking brake cable and No. 3 parking brake cable from the No. 1 parking brake pull rod.
Remove the No. 1 parking brake pull rod, bush and compression spring from the parking brake lever.
Remove the straight pin from the parking brake lever.
Remove the 4 bolts and parking brake lever.
REMOVE PARKING BRAKE SWITCH ASSEMBLY
Remove the screw and parking brake switch.